Feed Production Line Self Priming Small Poultry Feed Pellet Machine For Chicken Adela

Product Description

Feed Production Line Self-priming Pulverized Feed Mixer Small Feed Mill Poultry Machine For Chicken Adela

Feed mill information
Feed crushing mixer is a new type of feed processing equipment used in the aquaculture industry. It integrates crushing and mixing. It can also be called feed grinding and mixing combination machine, feed grinding and mixing unit. The wind power of the machine sucks corn kernels, soybeans, wheat and other grains into the feed crushing cavity, and then performs crushing and stirring

Parameter table of feed mill

Advantage of using feed mill
Small footprint, convenient transportation, higher efficiency and better sealing. The vertical feed crushing mixer is a kind of mixing machine that can be crushed and stirred, in large farm use the machine produce feeds will cheaper more than buy in market
The feed crushing and mixing mixer is suitable for small-scale farmers, such as pigs, cattle, horses, rabbits, chickens, fish, etc. to make pigeon feed mixing and crushing and other functional models. This machine is specially designed for rural farmers, small farms, small and medium-sized feed factory used. Easy to operate
Raw materials for making feed can be soybeans, soybean meal, corn, fish meal, amino acids, miscellaneous meal, additives

Precautions when use machine

1. In order to avoid accidents during the transportation, loading and unloading of the machine, it is necessary to check whether the bolts and nuts of each part are loose, whether the flat teeth, round teeth, and spindle nuts are loose before use. Turn the pulley by hand to check whether the machine has any collisions
2. Whether the rotation of the machine is flexible, whether there is any debris in the machine, start the machine and idle for 3 minutes, and then start the operation if there is no abnormal phenomenon
3. When working, you must pay attention to clearing the sundries in the materials. It is strictly forbidden to enter the machine with iron and stones to avoid damage to the machine and people
4. The cloth bag should have a length of more than 4 meters and a diameter of 0.6 meters. The cloth should not be too dense, and the material should be discharged in time during use to ensure that the bag has sufficient air permeability
5. Feeding should be uniform, and pay attention to the power load to avoid choking. When crushing particles, the pumping plate regulator can be used to adjust the feeding amount
6. Grease should be added before starting the machine every day, and the condition of the bearing should be checked after 500 hours of use. When installing the sieve, the side with burrs should be installed on it. According to the fineness of crushed materials, select sieves with different diameters